February 17, 2008

I glued down the second aileron/flap spar today. I had previously taken out all the staples and trimmed down the last one and pretty quickly did all the structure for the second one last Friday. I wanted to have it ready to glue in case there was a warm enough day. Today was just warm enough so off I went. Now that I'm done with all the wood parts, I need to get the garage ready for the tail assembly. The biggest part of that is to get a good solid flat and level surface to do assembly. So I'm going to clean up a bit and work on the table surface next. Here's the first one all trimmed up as well as the second on I just glued.

  |   Wing Parts Menu   |   Home