February 5, 2007

It was warm again today so I skipped out of work a little early to take advantage. If I knew I would have more opportunities to glue, I wouldn't be so excited but I have a lot of stuff backed up waiting to be glued. Today, I did the next two sections of the main stabilizer spar plywood backing, scarfed together with the previously glued center section. I also glued on the center section plywood pad on the other face of the spar. Here the whole thing clamped down and curing.

I also trimmed the two outer spar plywood pads I glued yesterday, as well as the front main fin spar cover and hinge pass through that I glued yesterday.

  |   Tail Parts Menu   |   Home