January 21, 2006

The staples I ordered were the Senco C-size with 3/8 inch legs so they wouldn't go all the way through these thin little capstrips. On the Sequoia website, someone suggested to use this 1/8 inch nylon cord to keep the staples from embedding themselves into the plywood and to create an easy mechanism to lift the staples out. It easily follows the stapling and is reusable. It took quite a while today, but I did the strips for all 5 ribs and covered frame #11. I'll trim the strips and the frame covers the exact shape later.

  |   Tail Parts Menu   |   Home