January 15, 2006

Today, I covered the first ribs that I made with 1 mm birch plywood. I'm still new at this, covering things with plywood job, so I tried it this way again. I traced the shapes on the scuffed side of the plywood and then used a utility knife to cut the shape out a little oversize. Then, I used the glue on the ribs and the acid on the plywood and weighed it down with the large straight sheet of regular plywood with my amp placed on top. This glues all three at once. Later on, I'll sand the oversize parts down and bevel the edges

  |   Tail Parts Menu   |   Home