December 11, 2005

I glued down all the pieces I made yesterday which finishes up all of the structure for the firewall fuselage frame. After it was cured, I put some sandpaper on one end of a long board and sanded all the excess glue flat out. I'm not sure what I'll do about covering it with plywood (the entire frame get plywood on both sides and then some). I may just do one side of it for now and save the rest for fuselage assembly. Aside from the plywood covers, which I may do sporadically...this concludes the fuselage frame assembly task! I'll put those updates in this section as I do it, but I'm going to be switching focus now on the tail section parts. Onwards!

  |   Fuselage Parts Menu   |   Home