December 9, 2005

I worked on fitting these pieces for phase 2 of the firewall frame structure in my spare moments this week. Today I was able to finalize them and glue them in. This structure will provide a good base for the majority of the rest of the frame structure. I may do two more phases to finish the structure or I may do one, I'm not sure yet. After the glue was dry tonight, I pulled the frame out of the mold and did some measuring and tracing for a lot of the blocking. Tomorrow I'll cut them out and fit them.

By the way, the papers and crap underneath the middle of the structure was necessary because my backing board has decided to sag in the middle and I needed to build it up to get the pieces to lay in there correctly for fitting and gluing.

  |   Fuselage Parts Menu   |   Home