September 15, 2005
In my spare moments this week, I've been working on odds and ends. I made a first version of the jig I'll test out for making the scarf cuts on the closed laminated frames. I'm definitely going to make some trial cuts on scrap wood to make sure I have the angle right and to get the hang of the cut.
I also started preparing some more jigs for the fuselage frames. I still have to cut out a few of them that I had previously drawn, so I did some connect the dots on at least 4 more curves I laid out. None of this is particularly exciting work, but it has to be done.
|
Fuselage Parts Menu
|
Home